|
|
|
|
|
 |
Name: S60X6 (2") male buttress
D1: 60mm (2.36")
P1: 6mm (0.24")
Standard: DIN 6131 (Schütz do not use this specification, our adaptors do fit)
Note: Most common thread found on European IBC's |
 |
Name: 2" NPS male
D1: 59.6mm (2.35")
P1: 2.21mm (0.09" - 11.5 TPI)
Standard: ANSI B1.20.1-1983
Note: American National Standard Straight Pipe Thread |
 |
Name: 2" Camlock male with 2" BSP
D1: 63mm (2.48") (59.4mm (2.34") thread)
P1: 2.3mm (0.09" 11 TPI)
Standard: Camlock- A-A-59326 : 1992 Thread – BS 2779 : 1986
Note: Camlock male adapter with added external thread for cheap and compact dust cap |
 |
Name: 2" Camlock male with 2 1/8" BSP
D1: 63mm (2.48") (62.7mm (2.47") thread)
P1: 2.3mm (0.09" 11 TPI)
Standard: Camlock- A-A-59326 : 1992 Thread – N/A
Note: Camlock male adapter with added external over sized thread for cheap and compact dust cap and added seal area for connecting a female Camlock. |
 |
Name: 2" Camlock male adapter
D1: 63mm (2.48")
P1: N/A
Standard: Camlock- A-A-59326 : 1992
Note: 2" Camlock male adapter fitted to an IBC |
 |
Name: M80X3 male thread
D1: 80mm (3.15")
P1: 3mm (0.12")
Standard: ISO 68 (ANSI B1.13M)
Note: A 80mm (3.15") metric thread found mainly on the Chinese Kingtainer IBC |
 |
Name: S100X8 (3") male buttress
D1: 97-100mm (3.82" - 3.94")
P1: 8mm (0.32")
Standard: N/A
Note: Found on a lot of 3" outlet IBC's, short length and a large thread depth |
 |
Name: 3" Camlock with 3" BSP
D1: 91.5mm (3.6") (87.7mm (3.45"0) thread)
P1: 2.3mm (0.09" 11 TPI)
Standard: Camlock- A-A-59326 : 1992 Thread – BS 2779 : 1986
Note: Camlock male adapter with added external thread for cheap and compact dust cap |
|
|
|
| |
Designed by Firstfrag - All Rights Reserved